第一：先将前面板插入外壳

Insert the front panel into the casing.

第二：从侧边放入电视机屏幕框

Place the television screen frame into the side.

第三：将屏幕框卡入前面板，如果松动可以将屏幕边框打印的时候放大一点，也可以使用胶水。

Secure the screen frame into the front panel. If it feels loose, you can enlarge the print of the screen frame border slightly during the printing process, or you can also use glue for additional stability.

第四：将旋钮面板孔位对齐前面板。

Align the hole positions of the knob panel with the front panel.

第五：将三颗圆柱形卡扣从背面按压进去。

Press three cylindrical latches in from the back.

第六：安装正面旋钮。

Install the front knobs/dials.

第七：安装logo和天线。logo和天线按压进去就可以 如果logo松动可以打印的时候放大一点，也可以用胶水。空白Logo在3盘外，可以通过BambuStudio DIY自己的logo 

Attach the logo and antenna. Simply press them in place. If the logo feels loose, you can enlarge it slightly during the printing process, or use glue for added stability.You can use Bambu Studio to create your own logo. The blank logo panel is on the outer side of the plate3.

第八：安装背面螺丝，背面螺丝可以松紧用于固定手机防止手机后倾。

Install the screws on the back. These screws can be tightened or loosened to secure the phone and prevent it from tilting backwards.

第十：关于增高垫片，可以通过BambuStudio Z轴缩放高度用来满足不同手机尺寸来适应屏幕窗口。小尺寸手机需要增高一点以及是否带手机壳等尺寸具体可以自己根据自己的手机调整。

Regarding the height-increasing spacers, you can use the Z-axis scaling feature in BambuStudio to adjust the height according to different phone sizes, ensuring compatibility with the screen window. For smaller phones or those with cases, you may need to increase the height slightly. The exact adjustment can be made based on your specific phone and case dimensions.