1/30 Update
V2 released :
https://makerworld.com/models/1054212
12/22 Update
I add the brim and decrease the bottom layer to 4, hope that can prevent the wrapping problems
12/22更新
增加了裙邊設置並且將底部層數減少為4層,希望這樣可以減少翹曲的情況發生
This is a phone stand that requires no support structures during the printing process. It only takes 60 grams of material and 90 minutes to complete. A specially designed notch allows the phone to charge while being placed on the stand, and it features multiple adjustable angles for self-positioning. If adhesion issues occur during the printing process, please increase the brim settings.
If you want to scale up this model for printing, please ensure that the X and Y axes are scaled proportionally to ensure the hinge operates smoothly.
This model also demonstrates good strength when made with AMS TPU filament. If you plan to print using AMS TPU, please increase the infill density.
這是一個手機支架,列印過程不需要任何的支撐,僅需要60公克的耗材以及90分鐘即可完成,特別設置的缺口允許手機放置時一邊進行充電,並且有多段的角度可進行自我定位,如果列印過程有發生黏著力不足的情況,請增加群邊
如果想將此模型進行放大列印,請確保X以及Y方向的比例是一致的,轉軸才能順利運作
這個模型在AMS TPU耗材製作中,也有不錯的強度,如果想使用AMS TPU進行列印,請增加填充密度
您不得以任何方式分享、分许可、出售、出租、托管、转让或分发该作品的数字或3D打印版本,或该作品的任何其他数字或物理格式的衍生作品(包括但不限于该物品的二次创作,以及在其他数字平台上的托管)。未经许可,不得以任何方式使用这些物品进行费用收取。
评论 & 评分 (61)