V3 Series - Vortex Spiral

版权申述

V3 Series - Vortex Spiral

助力
103
360
11
GIF
GIF

打印配置(5)

全部
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

Taller Version, 0.2mm layer, 2 walls, 15% infill
Taller Version, 0.2mm layer, 2 walls, 15% infill
设计师
2.9 h
1 
4.8(6)

Shorter, 0.2mm layer, 2 walls, 15% infill
Shorter, 0.2mm layer, 2 walls, 15% infill
设计师
2.2 h
1 

更高 - 0.24mm层高,10%填充,90%尺寸
更高 - 0.24mm层高,10%填充,90%尺寸
1.6 h
1 
5.0(3)

125%尺寸(增大25%)+无需AMS
125%尺寸(增大25%)+无需AMS
4.2 h
2 
点击查看更多

在 Bambu Studio 中打开
助力
103
360
11
9
320
223
发布于

描述

The Design

After something new? Here's the Vortex Spiral

 

Compatible with the rest of the V3 Series, this design features a single spiral

 

There's two variants, a slightly taller (100mm / 4 inches) and slightly shorter version (83mm / 3 inches).

 

Let me know if you experience any issues.

 

If you enjoy this print consider giving it a boost (It'd really help me out!)

 

Boost Me (免费)

Never Needed, Always Appreciated!

 

Printing

 

The setting in the print profile have been tested extensively to give the best result. However the underside of the spiral may still need to be cleaned up and smoothed slightly

 

I like pushing designs to what the printers are capable of. If your having issues, let me know i will try and help. 

 

The easiest was to do this is to run another inner part from the same series (with a flat base)

 

The Ball prints over a disc - this allows it to float, the disc is no needed.

 

Once printed let the build plate cool before trying to remove.

 

My Work

After many years in Engineering, I've decided to try and follow my childhood dream of becoming of a Creative Designer.

A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts.

 

It's been a Roller Coaster but I'm almost there now!

 

Boosts really do help me out

 

To support me even more (not ever required), for information around development of my models (background to come) and for commercial use, I've started a Patreon here:

https://www.patreon.com/RJ_Design

评论 & 评分 (11)

请填写您的意见
(0/5000)

打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
很好,很不错的配置,光滑完整不变形
0
回复
打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
0
回复
打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
不是很流畅,不知道怎么修一下
1
回复
打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
有意思
0
回复
打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
80%比例打印,球79%,很丝滑。
0
回复
手机直接打印就可以了嘛,需要用切片软件支撑不?
0
回复
有创意
0
回复
打印配置
Taller Version, 0.2mm layer, 2 walls, 15% infill
0
回复
打印配置
更高 - 0.24mm层高,10%填充,90%尺寸
0
回复
打印配置
更高 - 0.24mm层高,10%填充,90%尺寸
0
回复

许可证

本作品以Standard Digital File License方式授权。

您不得以任何方式分享、分许可、出售、出租、托管、转让或分发该作品的数字或3D打印版本,或该作品的任何其他数字或物理格式的衍生作品(包括但不限于该物品的二次创作,以及在其他数字平台上的托管)。未经许可,不得以任何方式使用这些物品进行费用收取。