贴标签的带透光的色卡/Color cards with transparent labels

透光部分分别是0.2层高 0.6层高 1.0层高和1.4层高 对应的是1层3层5层7层

The transparent parts are 0.2层高, 0.6层高, 1.0层高, and 1.4层高 respectively, corresponding to 1层, 3层, 5层, and 7层

首先，你需要有可以打印文字的12mmx22mm的标签，当然你手写也可以，模型凹陷的部分正好可以放入一张12MM x 22MM的标签 ，你也可以自己裁剪成同样大小粘贴进去，因为这个色卡的尺寸某些汉字或者字符过多会导致很模糊，或者无法打印中文，所以我重新修改了这个色卡样品

First of all, you need to have a 12mmx22mm label that can print text, of course, you can also handwrite, the concave part of the model can just put a 12MM x 22MM label, you can also cut it into the same size and paste it in, because the size of this color card Some Chinese characters or too many characters will cause it to be very blurry, or can not print Chinese, so I re-modified this color card sample

色卡的收纳使用的是Swatch Display Board by Bambu Lab 来自 Bambu Lab - MakerWorld

还有其他版本的可以下载

贴标签的色卡/Labeling Swatch Sample 二次创作 - 来自 Evan76 - MakerWorld