This is a sturdy height increase bracket with a 2mm edge to prevent glass from falling off due to excessive shaking. It is a height increase bracket used to prevent wear and tear from the contact between the PTFE tube and the top glass, and the edge holes also increase the machine's heat dissipation, so it will be stronger than most brackets.

这是一款坚固的增高架他的边缘衍生了2mm防止玻璃因为抖动大而掉落，它是一款用于防止特氟龙管与顶部玻璃接触磨损的增高架，同时边缘孔位也是增加机器散热的。

Its assembly requires 12 screws, 3 *15或者3*16

它的组装需要12枚，3*15或者3*16的螺丝，因此他会比大多数支架坚固。